Twin Keel Fish
Traditional Fish — Speed, Flow & Twin-Fin Freedom
Overview
This board is our take on the original Steve Lis fish — fast, responsive, and built to draw long clean lines. With a low rocker, forward foam, and the wide point pushed under the chest, it paddles easy and gets in early. Low rails keep it feeling sensitive and positive on rail, with just a touch more release up front and a harder edge through the tail to give it that extra drive when you need it.
The bottom starts with a subtle vee through the nose, flattens out under your stance, and finishes with a twin vee and concave channel between the fins. That combo gives the board lift, speed, and smooth transitions, perfect when leaning into long drawn-out carves or racing sections.
It’s glassed with a set of Australian-made wooden keels and shaped with a wide fish tail for that classic, connected twin-fin feel. Whether you’re threading point break lines or cruising beachies, this board holds speed and flow without ever feeling stiff.
Design Features
Tail: Wide fish, fast and loose with plenty of hold
Rails: Low, adds sensitivity and bite through turns
Bottom:
Slight vee in the nose
Just under flat through the middle
Twin vee with concave channel between fins
Rocker: Low, quick to paddle and gets up and going fast
Fin Setup: Twin, glass-on Australian made wooden keels for classic feel and drive
Glassing:
6oz + 4oz deck
6oz bottom
Colour: [Add tint or pigment detail here]
Ideal Conditions
Best for clean walls and down-the-line waves, from points to beach breaks with shape
Suits surfers chasing classic twin-fin glide
Great for intermediate and up, but accessible to anyone after something fast and smooth
Perfect for mixing feel and flow without going full retro
Available Sizes
5’4” x 20 1/4” x 2 1/2”, approx. 31.5L
5’6” x 20 1/2” x 2 5/8”, approx. 33.5L
5’8” x 20 3/4” x 2 3/4”, approx. 35.5L
5’10” x 21” x 2 3/4”, approx. 36.5L
6’0” x 21 1/4” x 2 3/4”, approx. 37.5L
6’2” x 21 1/2” x 2 3/4”, approx. 38.5L
6’4” x 21 3/4” x 2 7/8”, approx. 40.5L
6’6” x 22” x 3”, approx. 43.0L
All volume figures are approximate due to handshaped construction.
Price Breakdown
Base board (clear finish): $1,100 AUD
Resin tint (single side): +$75 AUD
Resin tint (deck + bottom): +$150 AUD
Glass-on Australian made wooden keel fins: Included
Finish coat polish (shortboard, glass-on fins): +$120 AUD
Total (as shown with full tint and polish): $1,370 AUD
Prices may vary slightly depending on size and custom options.
Traditional Fish — Speed, Flow & Twin-Fin Freedom
Overview
This board is our take on the original Steve Lis fish — fast, responsive, and built to draw long clean lines. With a low rocker, forward foam, and the wide point pushed under the chest, it paddles easy and gets in early. Low rails keep it feeling sensitive and positive on rail, with just a touch more release up front and a harder edge through the tail to give it that extra drive when you need it.
The bottom starts with a subtle vee through the nose, flattens out under your stance, and finishes with a twin vee and concave channel between the fins. That combo gives the board lift, speed, and smooth transitions, perfect when leaning into long drawn-out carves or racing sections.
It’s glassed with a set of Australian-made wooden keels and shaped with a wide fish tail for that classic, connected twin-fin feel. Whether you’re threading point break lines or cruising beachies, this board holds speed and flow without ever feeling stiff.
Design Features
Tail: Wide fish, fast and loose with plenty of hold
Rails: Low, adds sensitivity and bite through turns
Bottom:
Slight vee in the nose
Just under flat through the middle
Twin vee with concave channel between fins
Rocker: Low, quick to paddle and gets up and going fast
Fin Setup: Twin, glass-on Australian made wooden keels for classic feel and drive
Glassing:
6oz + 4oz deck
6oz bottom
Colour: [Add tint or pigment detail here]
Ideal Conditions
Best for clean walls and down-the-line waves, from points to beach breaks with shape
Suits surfers chasing classic twin-fin glide
Great for intermediate and up, but accessible to anyone after something fast and smooth
Perfect for mixing feel and flow without going full retro
Available Sizes
5’4” x 20 1/4” x 2 1/2”, approx. 31.5L
5’6” x 20 1/2” x 2 5/8”, approx. 33.5L
5’8” x 20 3/4” x 2 3/4”, approx. 35.5L
5’10” x 21” x 2 3/4”, approx. 36.5L
6’0” x 21 1/4” x 2 3/4”, approx. 37.5L
6’2” x 21 1/2” x 2 3/4”, approx. 38.5L
6’4” x 21 3/4” x 2 7/8”, approx. 40.5L
6’6” x 22” x 3”, approx. 43.0L
All volume figures are approximate due to handshaped construction.
Price Breakdown
Base board (clear finish): $1,100 AUD
Resin tint (single side): +$75 AUD
Resin tint (deck + bottom): +$150 AUD
Glass-on Australian made wooden keel fins: Included
Finish coat polish (shortboard, glass-on fins): +$120 AUD
Total (as shown with full tint and polish): $1,370 AUD
Prices may vary slightly depending on size and custom options.
Traditional Fish — Speed, Flow & Twin-Fin Freedom
Overview
This board is our take on the original Steve Lis fish — fast, responsive, and built to draw long clean lines. With a low rocker, forward foam, and the wide point pushed under the chest, it paddles easy and gets in early. Low rails keep it feeling sensitive and positive on rail, with just a touch more release up front and a harder edge through the tail to give it that extra drive when you need it.
The bottom starts with a subtle vee through the nose, flattens out under your stance, and finishes with a twin vee and concave channel between the fins. That combo gives the board lift, speed, and smooth transitions, perfect when leaning into long drawn-out carves or racing sections.
It’s glassed with a set of Australian-made wooden keels and shaped with a wide fish tail for that classic, connected twin-fin feel. Whether you’re threading point break lines or cruising beachies, this board holds speed and flow without ever feeling stiff.
Design Features
Tail: Wide fish, fast and loose with plenty of hold
Rails: Low, adds sensitivity and bite through turns
Bottom:
Slight vee in the nose
Just under flat through the middle
Twin vee with concave channel between fins
Rocker: Low, quick to paddle and gets up and going fast
Fin Setup: Twin, glass-on Australian made wooden keels for classic feel and drive
Glassing:
6oz + 4oz deck
6oz bottom
Colour: [Add tint or pigment detail here]
Ideal Conditions
Best for clean walls and down-the-line waves, from points to beach breaks with shape
Suits surfers chasing classic twin-fin glide
Great for intermediate and up, but accessible to anyone after something fast and smooth
Perfect for mixing feel and flow without going full retro
Available Sizes
5’4” x 20 1/4” x 2 1/2”, approx. 31.5L
5’6” x 20 1/2” x 2 5/8”, approx. 33.5L
5’8” x 20 3/4” x 2 3/4”, approx. 35.5L
5’10” x 21” x 2 3/4”, approx. 36.5L
6’0” x 21 1/4” x 2 3/4”, approx. 37.5L
6’2” x 21 1/2” x 2 3/4”, approx. 38.5L
6’4” x 21 3/4” x 2 7/8”, approx. 40.5L
6’6” x 22” x 3”, approx. 43.0L
All volume figures are approximate due to handshaped construction.
Price Breakdown
Base board (clear finish): $1,100 AUD
Resin tint (single side): +$75 AUD
Resin tint (deck + bottom): +$150 AUD
Glass-on Australian made wooden keel fins: Included
Finish coat polish (shortboard, glass-on fins): +$120 AUD
Total (as shown with full tint and polish): $1,370 AUD
Prices may vary slightly depending on size and custom options.